Rubber Pitch bearings profile seal parts
Pitch bearings profile
Rubber profile obtained by compression molding or by extrusion, used in Wind Mills to protect the bearings used to position the rotating blades.
Our factory can make any rubber for your application per your request.
EPDM
Good resistance to hot water and steam, detergents, caustic potash solutions, silicone oil and greases, many polar solvents, and many diluted acids and chemicals, along with a high level of ozone resistance. EPDM materials are totally unsuitable for use with all mineral oil products (lubricants, fuels).
FKM
Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, transmission and ATF oils to approx. +150°C, fuels, non-flammable hydraulic pressure fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons, water to max. +80°C, excellent resistance to weathering, ozone and ageing, very low gas permeability (and therefore excellent for vacuum application) and resistance to a wide range of chemicals.
HNBR
HNBR is obtained by fully or partially hydrogenating NBR. It leads to considerable improvement in resistance to heat, ozone and ageing, and gives it very good mechanical properties, e.g. good resistance to wear. The media resistance compares to that of NBR. HNBR has a good resistance to some refrigerants. The temperature application range is from -30°C to +150°C.
NBR
Good chemical resistance to mineral oils and greases, hydraulic oils H, HL, HLP, non-inflammable hydraulic pressure fluids HFA, HFB, HFC to approx. +50°C and water to max. +80°C
VMQ
Good resistance to water (up to 100 °C), aliphatic engine and transmission oils, animal and plant oils and fats. VMQ is generally not resistant to fuels, aromatic mineral oils, steam (short term up to 120 °C possible), silicone oils and greases, acids and alkaline compounds.
General Name | Chemical Description | Abbreviation |
EPDM Rubber | Ethylene propylene diene Monomer rubber | EPDM |
Nitrile Rubber | Acrylonitrile-butadiene rubber | NBR |
Neoprene Rubber | Chloroprene rubber | CR |
HNBR Rubber | Hydrogenated Acrylonitrile-butadiene rubber | HNBR |
Silicone Rubber | Silicone rubber | VMQ |
Thermoplastic Elastomers | Thermoplastic Elastomers | TPE/TPV |
Polyacrylate | Polyacrylate rubber | ACM |
Fluoroelastomer | Fluoroelastomer | FKM |
Any questions for seals, please do not hesitate to contact me. It is our pleasure to be on service of you!
Contact information:
Dongguan Walle Sealing Technology Development Co., Ltd
Tel: 86-769-33291139 / 22762051
Mobile: 13620011767
Fax: 86-769-22762052
URL: walleseals.en.made-in-china.com